氟烷基化C_(60)与四（N，N-二甲基）氨基乙烯电荷转移复合物磁性的EPR研究

变温ERP研究揭示氟烷基化富勒烯C_(60)(R_f)_n与四(N,N-二甲基)氨基乙烯 (TDAE)间稳定的电荷转移络合物TDAE-C_(60)(R_f)_n的居里温度高达190K[R_f = C_3F_7，H（CF_2）_4]。而非氟烷基化络合物TDAE-C_(60)的相应值仅为16.1K。 这种铁磁性可能是络合物分子中氟烷基化富勒烯多价阴离子基在相应居里温度下具 有某种有序排列的缘故。     

低头-头链含量的聚偏氟乙烯合成

研究了偏氟乙烯的聚合条件与其聚合物的头-头链含量的关系。实验表明聚合物的头-头链的含量与聚合温度有关,而与引发剂的种类无关。因而,可以在较低的聚合温度下聚合制得带有低的头-头结构(约3％)的聚偏氟乙烯。将聚合物链的A结构含量对其熔点作图,得一直线,可表示为方程式A=24.8+0.362T_m(％)。     

Dexmedetomidine promotes the progression of hepatocellular carcinoma through hepatic stellate cell activation

Dexmedetomidine (DEX) is an anesthetic that is widely used in the clinic, and it has been reported to exhibit paradoxical effects in the progression of multiple solid tumors. In this study, we sought to explore the mechanism by which DEX regulates hepatocellular carcinoma (HCC) progression underlying liver fibrosis. We determined the effects of DEX on tumor progression in an orthotopic HCC mouse model of fibrotic liver. A coculture system and a subcutaneous xenograft model involving coimplantation of mouse hepatoma cells (H22) and primary activated hepatic stellate cells (aHSCs) were used to study the effects of DEX on HCC progression. We found that in the preclinical mouse model of liver fibrosis, DEX treatment significantly shortened median survival time and promoted tumor growth, intrahepatic metastasis and pulmonary metastasis. The DEX receptor (ADRA2A) was mainly expressed in aHSCs but was barely detected in HCC cells. DEX dramatically reinforced HCC malignant behaviors in the presence of aHSCs in both the coculture system and the coimplantation mouse model, but DEX alone exerted no significant effects on the malignancy of HCC. Mechanistically, DEX induced IL-6 secretion from aHSCs and promoted HCC progression via STAT3 activation. Our findings provide evidence that the clinical application of DEX may cause undesirable side effects in HCC patients with liver fibrosis.Subject terms: Cancer microenvironment, Cell growth     

疏水缔合型增稠剂聚(丙烯酰胺-丙烯酸高级酯)的合成及增稠性能研究

采用沉淀聚合法合成了聚（丙烯酰胺－丙烯酸十四酯），聚（丙烯酰胺－丙烯酸十六酯）和聚（丙烯酰胺－丙烯酸十八酯），重点讨论了共聚物中疏水基团数量及疏水基团链长对增稠性能的影响。采用凯达尔定氮法和动态热分析（DMTA）测定了共聚物的组成及玻璃化温度。     

Preparation and characterization of trans-RhCl(CO)(TPPTS)2-intercalated layered double hydroxides

trans-RhCl(CO)(TPPTS)₂ (TPPTS=tris(m-sulfonatophenyl)phosphine) has been intercalated into Zn-Al layered double hydroxides (LDHs) by the method of ion exchange. The structure, composition and thermal stability of the composite material have been characterized by powder X-ray diffraction, Fourier transform infrared and ³¹P solid-state magic-angle spinning nuclear magnetic resonance spectroscopy, elemental analysis, thermogravimetry, and differential thermal analysis. The geometry of trans-RhCl(CO)(TPPTS)₂ was fully optimized using the PM3 semiempirical molecular orbital method, and a schematic model for the intercalated species has been proposed. The thermal stability of trans-RhCl(CO)(TPPTS)₂ is significantly enhanced by intercalation, which suggests that such materials may have prospective application as the basis of a supported catalyst system for the hydroformylation of higher olefins.     

Ti接枝MCM-41催化剂的结构设计及化学亲和选择性研究

 用二氯化钛茂作为活性物种的来源，利用Si－MCM－41催化剂表面羟基的反应性，得到了Ti接枝MCM－41催化剂的两种结构模型．结构表征结果表明，Ti接枝MCM－41催化剂不仅长程结构好，孔径分布均一，而且催化剂表面活性中心含量高．两种结构模型催化剂上芳烃羟化反应性能表明，Ti接枝MCM－41催化剂表面的亲水／憎水性可以在较宽的范围内调变，从而可实现控制芳烃羟化的化学亲和选择性．另外，研究结果还表明，Ti接枝MCM－41催化剂具有很好的活性稳定性．     

扫描近场光学显微镜对纳米结构的观察

光学显微镜在人们认识微观世界的过程中一直扮演着非常重要的角色．随着认识的深入，对空间分辨率的要求也越来越高．但是众所周知，普通光学显微镜（远场情况下）的分辨率受光的衍射效应所限制，一般可表达为0．61A／N．A．（约等于A／2，A为照射光的波长，N．A．为数值孔径）     

发用防晒剂DDABDT的反相高效液相色谱法测定

建立了反相高效液相色谱法测定发用防晒剂二甲基对胺基苯甲酰胺丙基十二烷基二甲胺甲苯磺酸盐(简称DDABDT)的方法.采用的色谱条件为色谱柱Symmetry C8柱,流动相为V(乙腈):V(10 mmol/L NaAc)=65:35溶液(含体积分数0.02%三氟乙酸,pH5.04),流速1.0 mL/min;检测波长305 nm;进样量20μL.DDABDT质量浓度为0.05～1000 mg/L时,其浓度与峰面积呈良好的线性关系(R2＞0.999),检出限为0.02 mg/L(S/N=3).洗发水A中DDABDT的回收率在98.0%～102%之间,发样提取液中DDABDT的平均回收率在85%～108%之间.洗发水中DDABDT浓度测定日内和日间相对标准分别为1.2%,3.4%.头发吸附DDABDT含量测定日内和日间相对标准偏差(RSD)分别为9.1%,9.8%.同时以高效液相色谱-电喷雾离子化质谱对色谱法测定样品的DDABDT峰进行了验证.该方法已用于洗发水及头发吸附DDABDT的分析.     

Maximum spectrum of continuous wavelet transform and its application in resolving an overlapped signal

To estimate the number of peaks and to find the individual peak positions in an overlapped signal, a new method called maximum spectrum of continuous wavelet transform (MSCWT) was developed by extracting the maximum coefficients of continuous wavelet transform (CWT). The peak position in MSCWT was the same as that in its original signal. In this process, CWT was performed not on a single dilation but on an appreciation dilation range. To obtain such a range, a new criterion was introduced to choose a center dilation, which was used to form the dilation range. If Cdilation denoted the center dilation, the proper dilation range was [Cdilation -6 +/- 2, Cdilation +1 +/- 1]. The Mexican Hat function was an analytical wavelet. Utilizing the information of the peak number and the position detected by MSCWT, a fitting route was performed to recover the original signal. One simulated and four true overlapped signals, including high performance liquid chromatography (HPLC), ultraviolet-visible (UV) spectrum, and differential pulse voltammetric (DPV), were processed, and the results indicated that MSCWT could detect an overlapped peak number and position, and the curve fitting based on information of MSCWT had a higher accuracy. The proposed method was an efficient one in resolving different types of overlapped signals.